GES Generator Service (401-500kVA)

Service Description

*Please note this is the price for the service only. When we confirm your booking (during standard working hours) we will make a separate charge of £148 per hour based on travel time from S41 9EY to the location of your generator. Travel time covers mileage & hours return and will only be charged one way. This charge will be made for journeys over 1hr from us, journeys under 1hr will not be charged. Travel time is calculated from Google maps. Standard Generator Service (Upto 500kVA) Lubricating System Change engine lubricating oil Change engine lubricating oil filter Check engine oil for leaks Fuel System Change fuel filter(s) Check fuel tank breather Check fuel system pipes and unions for leaks Check operation of engine governor and stop controls Check operation of fuel system priming pump Check fuel level Cooling System Check coolant and antifreeze content and top up as necessary Check coolant filter Check for coolant leaks Check condition of hose and clips Check condition of fan belts and adjust or renew Check water pump and lubricate Check and lubricate fan hubs and idlers Check condition of radiator and clean fins Air Intake System Check and replace engine air filter if required Clean and check air cleaner Check turbocharge operation Check all inlet manifolds and gaskets Exhaust System Check & tighten manifold nuts and screws if necessary Check for leaks & signs of blowing Check silencer and piping Drain moisture trap in exhaust if fitted Engine Electrical System Check battery level and connection Check charging system Check operation of starting system Alternator Check bearings and lubricate Check engine alternator/engine alignment & coupling General Maintenance Check engine mounting bolts Check engine/alternator anti-vibration mountings Check and clean engine crankcase Lubricate all engine linkages Canopy (If fitted) Check for scratches or paint blemishes and advise user Check keys present and lockable Operation Start the generator and check for leaks, loose connection and abnormal operating conditions. Correct as necessary. Initiate automatic start and transfer the load if desired by customer. If required return set to Standby set up.